Law of surface movement for multi-coal seam strip mining ?

It is an important part of green mining to control the disasters of coal mining which have caused irreversible damages to buildings and ecological environment. Strip mining is one of the efficient measures to control surface subsidence and mining damage. However, the research on the laws of the surface subsidence are still deficient in multi-coal seam strip mining at present. Based on the Fast Lagrangian Analysis of Continua (short for FLAC3D) numerical simulation software, the laws of the surface subsidence and horizontal movement were systematically studied for different depths, different mining widths, different distances between seams, different mining thickness, different parameters between seams and the special relations of the upper pillar and the lower pillar in the vertical direction in multi-seam strip mining. The function relation between the maximum subsidence and the maximum horizontal movement with the depth, the mining width, the seam distance, mining thickness, different parameters between seams and the partial offset are summarized respectively. Finally the formula integrating the surface maximum subsidence value and the maximum horizontal movement was deduced. The results can be used for reference theory and measure in forecasting the surface displacement in multi-coal seam strip mining.