-
苏州燃气集团横山储罐场生活区办公楼“6·11”重大液化石油气爆炸事故调查报告docx
苏州燃气集团横山储罐场生活区办公楼“6·11”重大液化石油气爆炸事故调查报告
2013年6月11日7时26分,苏州燃气集团有限责任公司液化气经销分公司横山储罐场生活区综合办公楼发生液化石油气泄漏爆炸事故,造成11人死亡,9人受伤入院救治,其中1名伤员伤势严重,经抢救无效于6月20日死亡,直接经济损失1833万元。事故发生后,国家安监总局与江苏省委、省政府高度重视。国家安监总局立即派员赴现场指导应急处置和调查处理,总局监管二司和应急救援中心多次对事故调查进行指导和督办。江苏省罗志军书记、李学勇省长批示要求...2024-04-16 03:11:01浏览:4
查看 -
GB 5842-2023 液化石油气钢瓶
本文件规定了液化石油气钢瓶(以下简称气瓶)的型式、型号和基本参数、材料、设计、制造、试验方法和检验规则、标志、包装、涂敷、贮运和出厂文件等要求。
本文件适用于在正常环境温度(-40 ℃~60 ℃)下使用的、公称工作压力为2.1 MPa、公称容积不大于150 L、可重复盛装符合GB 11174的液化石油气的气瓶。
标准号:GB 5842-2023
标准名称:液化石油气钢瓶
英文名称:Liquefied petroleum steel gas cylinders
替代标准:GB/T 5842-2022
引用标准:GB/T 150.3 GB/T 222 GB/T 228.1 GB/T 1804 GB/T 2651 GB/T 2653 GB/T 6653 GB/T 7144 GB 7512 GB/T 8335 GB/T 9251 GB/T 9252 GB/T 12137 GB/T 13005 GB/T 15385 GB/T 17925 GB/T 33209 GB/T 35208 CJ/T 33 NB/T 47013.2 TSG 23...2024-04-03 17:30:01浏览:6
查看 -
GB 7512-2023 液化石油气瓶阀
本文件规定了液化石油气瓶阀(以下简称瓶阀)的型号表示方法、结构型式及基本尺寸、技术要求、检查与试验方法、检验规则、标志、包装、贮运。
本文件适用于使用环境温度为-40 ℃~+60 ℃、公称工作压力不大于2.5 MPa、介质符合GB 11174、进气口与出气口的中心线呈90°的液化石油气瓶阀。
本文件不适用于车用液化石油气瓶阀。
标准号:GB 7512-2023
标准名称:液化石油气瓶阀
英文名称:Valves for liquefied petroleum gas cylinders
替代标准:GB/T 7512-2017
引用标准:GB/T 197 GB/T 228.1 GB/T 1184 GB/T 1804 GB/T 3934 GB/T 5121.1 GB/T 5121.3 GB/T 5121.9 GB/T 5231 GB/T 8335 GB/T 8336 GB/T 10567.2 GB/T 13005 GB/T 15382 YS/T 482 YS/T 483...2024-04-03 14:45:01浏览:4
查看 -
SN/T 1651-2017 进出口液化石油气采样方法 手工法 Method of sampling for import and export liquified petroleum gases- Manual method
本标准规定了采取进出口液化石油气代表性样品的手工操作方法。<br />本标准适用于采取液化石油气液相部位的样品,不适用于采取液化石油气气相部位的样品。...
2024-01-09 13:36:01浏览:10
查看 -
ISO 20766-18-2019 道路车辆--液化石油气燃料系统组件--第18部分:软管 Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 18: Hose
This document specifies general information regarding the hose component of liquefied petroleum gas <br />fuel, intended for use on the types of motor vehicles as defined in ISO 3833. It provides general design <br />principles and specifies requirements for instructions and marking. It also specifies test requirements <br />for the hose.<br />This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels <br />in accordance with ISO 9162. It is not applicable to the following:<br />a) fuel containers;<br />b) stationary gas engines;<br />c) container mounting hardware;<br />d) electronic fuel management;<br />e) refuelling receptacles.<br />Fully metal bendable hoses are excluded from this document.<br />NOTE 1 It is recognized that miscellaneous components not specifically addressed herein can be examined <br />for compliance with the criteria of any applicable part of ISO 20766, including testing to the appropriate <br />functional tests.<br />NOTE 2 All references to pressure in this document are considered gauge pressures unless otherwise <br />specified. <br />NOTE 3 This document applies to devices which have a service pressure in the range of 110 kPa (Butane rich <br />at 20 °C) and 840 kPa (Propane at 20 °C), hereinafter referred to in this document. Other service pressures can <br />be accommodated by adjusting the pressure by the appropriate factor (ratio)....
2023-10-16 11:48:01浏览:10
查看 -
ISO 20766-11-2020 道路车辆--液化石油气(LPG)燃料系统部件--第11部分:手动关闭阀 Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 11: Manual shut-off valve
This document specifies general information regarding the manual shut off valve component of liquefied petroleum gas fuel, intended for use on the types of motor vehicles as defined in ISO 3833. It provides general design principles and specifies requirements for instructions and marking. It also specifies test requirements for the manual shut off valve.<br />This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following:<br />a) fuel containers;<br />b) stationary gas engines;<br />c) container mounting hardware;<br />d) electronic fuel management;<br />e) refuelling receptacles....
2023-10-03 16:48:02浏览:12
查看 -
ISO 20766-12-2019 道路车辆--液化石油气(LPG)燃料系统部件--第12部分:止回阀 Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 12: Non-return valve
This document specifies general information regarding the non-return valve component of liquefied <br />petroleum gas fuel, intended for use on the types of motor vehicles as defined in ISO 3833. It provides <br />general design principles and specifies requirements for instructions and marking. It also specifies test <br />requirements for the non-return valve.<br />This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels <br />in accordance with ISO 9162. It is not applicable to the following:<br />a) fuel containers;<br />b) stationary gas engines;<br />c) container mounting hardware;<br />d) electronic fuel management;<br />e) refuelling receptacles.<br />NOTE 1 It is recognized that miscellaneous components not specifically addressed herein can be examined <br />for compliance with the criteria of any applicable part of ISO 20766, including testing to the appropriate <br />functional tests.<br />NOTE 2 All references to pressure in this document are considered gauge pressures unless otherwise <br />specified.<br />NOTE 3 This document applies to devices which have a service pressure in the range of 110 kPa (Butane rich <br />at 20 °C) and 840 kPa (Propane at 20 °C), hereinafter referred to in this document. Other service pressures can <br />be accommodated by adjusting the pressure by the appropriate factor (ratio)....
2023-09-30 21:36:02浏览:11
查看 -
GB/T 35208-2017 自闭式液化石油气瓶阀 Self-closing valves for LPG cylinders
本标准规定了自闭式液化石油气瓶阀(以下简称“阀”)的术语和定义、阀的型号表示方法、结构型式及基本尺寸、技术要求、检查与试验方法、检验规则、标志、包装、贮运。<br />本标准适用于使用环境温度为-40℃~+60℃,公称工作压力不大于2.5MPa,适用介质符合GB 11174的液化石油气钢瓶上的自闭式瓶阀。<br />本标准不适用于车用液化石油气瓶阀。<br />注:本标准的压力均指表压。...
2023-09-08 06:00:01浏览:14
查看 -
GB/T 39248-2020 输送液化石油气和液化天然气用热塑性塑料多层(非硫化)软管及软管组合件 规范 含2023年第1号修改单
本标准规定了2种型别的输送液化石油气和液化天然气用热塑性塑料多层(非硫化)软管及软管组合件的要求。
每种型别分为2类一类是用于岸上另一类是用于离岸:
——A类用于岸上;
———B类用于离岸。
本标准适用于内径为25 mm~300 mm工作压力为1.05 MPa~2.5 MPa和工作温度范围为一196 ℃~+45℃的热塑性塑料多层(非硫化)软管及软管组合件。
注:离岸液化天然气软管组合件在 EN 1472-2中也有规定。...2023-08-07 00:36:01浏览:21
查看