States of Carbon Nanotube Supported Mo-Based HDS Catalysts
- 期刊名字:天然气化学(英文版)
- 文件大小:
- 论文作者:Hongyan Shang,Chenguang Liu,Yo
- 作者单位:Key Laboratory of Catalysis,Carbon Research Laboratory,Department of Chemical Engineering
- 更新时间:2022-11-22
- 下载次数:次
The dispersion of the active phase and loading capacity of the Mo species on carbon nanotube (CNT) was studied by the XRD technique. The reducibility properties of Co-Mo catalysts in the oxide state over CNTs were investigated by TPR, while the sulfided Co-Mo/CNT catalysts were characterized by means of the XRD and LRS techniques. The activity and selectivity with respect to the hydrodesulfurization (HDS) performances on carbon nanotube supported Co-Mo catalysts were evaluated. It was found that the main active molybdenum species in the oxide state MoO3/CNT catalysts were MoO2, but not MoO3, as generally expected. The maximum loading before the formation of the bulk phase was lower than 6% (percent by mass, based on MoO3). TPR studies revealed that the active species in the oxide state Co-Mo/CNT catalysts were reduced more easily at relatively lower temperatures in comparison to those of the Co-Mo/γ-Al2O3 catalysts, indicating that the CNT support promoted or favored the reduction of the active species. The active species of a Co-Mo-0.7/CNT catalyst were more easily reduced than those of the Co-Mo/CNT catalysts with Co/Mo atomic ratios of 0.2, 0.35, and 0.5, respectively, suggesting that the Co/Mo atomic ratio has a great effect on the reducibility of the active species. It was found that the incorporation of cobalt improved the dispersion of the molybdenum species on the support, and a phenomenon of mobilization and re-dispersion had occurred during the sulfurization process, resulting in low valence state Mo3S4 and Co-MoS2.17 active phases. HDS measurements showed that the Co-Mo/CNT catalysts were more active than the Co-Mo/γ-Al2O3 ones for the desulfurization of DBT, and the hydrogenolysis/hydrogenation selectivity of the Co-Mo/CNT catalysts was also much higher than those of the Co-Mo/γ-Al2O3. The Co-Mo/CNT catalyst with a Co/Mo atomic ratio of 0.7 showed the highest activity, whereas the catalyst with a Co/Mo atomic ratio of 0.35 had the highest selectivity.
-
C4烯烃制丙烯催化剂 2022-11-22
-
煤基聚乙醇酸技术进展 2022-11-22
-
生物质能的应用工程 2022-11-22
-
我国甲醇工业现状 2022-11-22
-
JB/T 11699-2013 高处作业吊篮安装、拆卸、使用技术规程 2022-11-22
-
石油化工设备腐蚀与防护参考书十本免费下载,绝版珍藏 2022-11-22
-
四喷嘴水煤浆气化炉工业应用情况简介 2022-11-22
-
Lurgi和ICI低压甲醇合成工艺比较 2022-11-22
-
甲醇制芳烃研究进展 2022-11-22
-
精甲醇及MTO级甲醇精馏工艺技术进展 2022-11-22
