ASTM A312/A312M-2019 冷加工奥氏体不锈钢焊接管和无缝管规格 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- 标准类别:
- 标准大小:
- 标准编号:ASTM A312/A312M-2019
- 标准状态:现行
- 更新时间:2023-06-03
- 下载次数:次
1.1 This specification2 covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.
Note 1: When the impact test criterion for a low-temperature service would be 15 ft·lbf [20 J] energy absorption or 15 mils [0.38 mm] lateral expansion, some of the austenitic stainless steel grades covered by this specification are accepted by certain pressure vessel or piping codes without the necessity of making the actual test. For example, Grades TP304, TP304L, and TP347 are accepted by the ASME Pressure Vessel Code, Section VIII Division 1, and by the Chemical Plant and Refinery Piping Code, ASME B31.3, for service at temperatures as low as −425 °F [−250 °C] without qualification by impact tests. Other AISI stainless steel grades are usually accepted for service temperatures as low as −325 °F [−200 °C] without impact testing. Impact testing may, under certain circumstances, be required. For example, materials with chromium or nickel content outside the AISI ranges, and for material with carbon content exceeding 0.10 %, are required to be impact tested under the rules of ASME Section VIII Division 1 when service temperatures are lower than −50 °F [−45 °C].
1.2 Grades TP304H, TP309H, TP309HCb, TP310H, TP310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309Cb, TP309S, TP310Cb, TP310S, TP316, TP321, TP347, and TP348, and are int
-
GB 30871-2022免费下载危险化学品企业特殊作业安全规范 2023-06-03
-
GB/T 1094.1-2013电力变压器 第1部分:总则 2023-06-03
-
GB/T 706-2016热轧型钢 2023-06-03
-
GB 9706.1-2020医用电气设备 第1部分:基本安全和基本性能的通用要求 2023-06-03
-
JB/T 10216-2013电控配电用电缆桥架 2023-06-03
-
GB 51251-2017建筑防烟排烟系统技术标准 2023-06-03
-
GB/T 10801.2-2018绝热用挤塑聚苯乙烯泡沫塑料(XPS) 2023-06-03
-
JTG D20-2017公路路线设计规范 2023-06-03