IEC 60400-2020 管形荧光灯灯座和起动器座 Lampholders for tubular fluorescent lamps and starterholders
- 标准类别:
- 标准大小:
- 标准编号:IEC 60400-2020
- 标准状态:现行
- 更新时间:2023-08-01
- 下载次数:次
This document states the technical and dimensional requirements for lampholders for tubular
fluorescent lamps and for starterholders, and the methods of test to be used in determining
the safety and the fit of the lamps in the lampholders and the starters in the starterholders.
This document covers independent lampholders and lampholders for building-in, used with
tubular fluorescent lamps provided with caps as listed in Annex A, and independent
starterholders and starterholders for building-in, used with starters in accordance with
IEC 60155, intended for use in AC circuits where the working voltage does not exceed
1 000 V r.m.s.
This document also covers lampholders for single-capped tubular fluorescent lamps
integrated in an outer shell and dome similar to Edison screw lampholders (e.g. for G23 and
G24 capped lamps). Such lampholders are tested in accordance with the following clauses
and subclauses of IEC 60238: 9.4; 9.5; 9.6; 10.3; 11.7; 12; 13.2; 13.5; 13.6; 13.7; 14; 16.3; 16.4; 16.5 and 16.9.
This document also covers lampholders which are integral with a luminaire or intended to be
built into appliances. It covers the requirements for the lampholder only. For all other requirements, such as protection against electric shock in the area of the terminals, the requirements of the relevant appliance standard are applicable and tested after building into the appropriate equipment, when that equipment is tested according to its own standard. Lampholders for use by luminaire manufacturers only are not for retail sale.
This document also applies, as far as is reasonable, to lampholders and starterholders other than the types explicitly mentioned above and to lamp connectors.
Where the term "holder" is used in this document, both lampholders and starterholders are
intended.
Where the term “bi-pin lampholder” is used, lampholders for wedged caps are also intended.dition 8.1 2020-02
CONSOLIDATED
VERSION
VERSION
CONSOLIDéE
colour
inside
Lampholders for tubular fluorescent lamps and starterholders
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
IEC 60400:2017-06+AMD1:2020-02 CSV(en-fr)
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright ? 2020 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this p
-
GB 30871-2022免费下载危险化学品企业特殊作业安全规范 2023-08-01
-
GB/T 1094.1-2013电力变压器 第1部分:总则 2023-08-01
-
GB/T 706-2016热轧型钢 2023-08-01
-
GB 9706.1-2020医用电气设备 第1部分:基本安全和基本性能的通用要求 2023-08-01
-
JB/T 10216-2013电控配电用电缆桥架 2023-08-01
-
GB/T 10801.2-2018绝热用挤塑聚苯乙烯泡沫塑料(XPS) 2023-08-01
-
GB 51251-2017建筑防烟排烟系统技术标准 2023-08-01
-
GB/T 13663.2-2018给水用聚乙烯(PE)管道系统 第2部分:管材 2023-08-01