-
TB/T 3082-2017 铁路救援起重机检查与试验方法 含2023年第1号修改单
本部分代替 TB/T 3082-2003《内燃铁路起重机检查与试验方法》。与 TB/T 3082-2003 相比本部分主要技术变化如下;
修改了标准适用范取消了最大额定起重量 100 125 1内燃铁路起机适用铁路救授起重机(见第1章2003 年版的第1章)
修改了规范性引用文件(见第 2 章2003 年版的第2章)修改了型式检验的条件(见 3.12003 年版的 3.1修改了出厂检验(见3.22003 年版的 32)
-一增加了外观检查(见4.3)
增加了系统检查与试验内容(见第 5 章)
增加了机构功能检查内容( 见第 6 )
一修改了结构检查与试验内容(见第7 章)
一增加了纵向载荷试验内容(见7.3)
一增加了转向架检查内容(见第 8 章)
一修改了车钩缓冲装置检查内容( 见第 9 章)
修改了起重机性能试验内容(见第 10 章2003 年版的第8章)
一修改了稳定性试验内容(见第 11 章2003 年版的第 9 章)除了试验种中的回送试验( 见 2003 年版的第 12 章)增加了线路运行试验(见第 12 章)
修改试验后检查内容( 见第 13 章2003 年版的第 15 章)一修改了检查与试验项目内容并按表 中项目名称对其检与试险方法进行了说明(见第 14章2003 年版的第 4 章):
删除了原标准中的回送前的整备( 2003 年版的第 16 章):增加了术资料检查内容( 见第 15 章)。
本标准由中国铁道科学研究院标准计量研究所提出并归口。
本标准起草单位:中车齐齐哈尔车辆有限公司中国铁路总公司、武桥重工集团股份有限公司、中车兰州机车有限公司中国铁道科学研究院标准计量研究所。
本标准主要起草人;张力群、董亚庚、于跃、苗立军、徐国辉、杜斌武、张小宏、瞿建平、白圣男。
本标准所代替标准的历次版本发布情况:TB/T 3082一2003。...2023-10-24 13:24:01浏览:19
查看 -
GB/T 24430-2023 双层床结构安全试验方法
本文件描述了双层床结构安全试验的条件、设备、步骤和试验报告。
本文件适用于安装完好的、床铺面离地高度≥600 mm的床。
本文件规定的强度和耐久性试验中的荷载和力适用于床铺面内部长度大于1 400 mm且其宽度小于或等于1 200 mm的床。
本文件不适用于离地高度≥600 mm床铺面下方的家具(如柜架、桌几、椅凳等)。
替代GB/T 24430.2-2009...2023-10-24 10:48:01浏览:18
查看 -
GB/T 43015-2023 合成纤维 短纤维干热收缩率试验方法
本文件描述了合成纤维短纤维干热收缩率的试验方法。
本文件适用于合成纤维短纤维。复合纤维短纤维等其他纤维参照使用。...2023-10-24 09:12:02浏览:9
查看 -
JIS A2201-2017 住宅等通过风机增压进行气密性的试验方法 Test method for performance of building airtightness by fan pressurization
この規格は,送風機を用いて建物内外に圧力差を生じさせ,主に住宅に供する建物及び建物の部位における気密性能を試験する方法について規定する。...
2023-10-21 17:48:02浏览:10
查看 -
ISO 9696-2017 水质--总活性度--厚源试验方法 Water quality — Gross alpha activity — Test method using thick source
This document specifies a method for the determination of gross alpha activity in non-saline waters for alpha-emitting radionuclides which are not volatile up to 350°C.<br />The method is applicable to raw and potable waters.<br />The range of application depends on the amount of total soluble salts in the water and on the performance characteristics (background count rate and counting efficiency) of the counter.<br />It is the laboratory’s responsibility to ensure the suitability of this method for the water samples tested....
2023-10-21 17:00:01浏览:13
查看 -
JB/T 13058-2017 往复式内燃机 线束可靠性试验方法 Reciprocating internal combustion engines- Wire harness reliability test methods
本标准规定了往复式内燃机在发动机台架上进行线束可靠性考核的试验方法及试验结果的评定。<br />本标准适用于道路车辆、船舶、农用拖拉机和林业机械、工程机械、发电机组、排灌机械用往复式内燃机(以下简称内燃机)的线束。其他用途往复式内燃机的线束也可参照采用。...
2023-10-21 07:00:01浏览:7
查看 -
HG/T 5037-2016 甲醇制氢催化剂活性试验方法 Test method of activity for methanol hydrogen production catalysts
本标准规定了甲醇制氢催化剂的活性试验方法。<br />本标准适用于制氢工艺中甲醇加水制备氢气用催化剂。...
2023-10-21 00:48:01浏览:9
查看 -
KS M3019-2018 塑料的切断变形试验方法 Testing methods for shear strength of plastics by punch tool
...
2023-10-20 23:12:01浏览:9
查看 -
YB/T 185-2017 连铸保护渣黏度试验方法 Test method for viscosity of continuous casting mold powder
本标准规定了连铸保护渣黏度试验的原理、设备及材料、取样和制样、仪器常数测定、试验步骤、结果计算及表示、试验报告。<br />本标准适用于连铸保护渣熔渣黏度的测定,测定范围:黏度值≥0.050Pa · s。...
2023-10-20 16:00:01浏览:20
查看 -
JB/T 11558-2013 粘土砂混砂机 可靠性试验方法 Mixer of green sand—Test methods for reliability
本标准规定了粘土砂混砂机可靠性指标、故障分类及当最故障系数、故障判定原则、试验方法、数据处理和试验结果等。<br />本标准适用于铸造生产用粘土砂混砂机(以下简称混砂机)现场可靠性测定试验。...
2023-10-19 21:48:02浏览:14
查看 -
GB/T 42969-2023 元器件位移损伤试验方法
本文件描述了元器件位移损伤的试验方法。
本文件适用于光电集成电路和分立器件,如电荷耦合器件(CCD)、光电耦合器图像敏感器(APS)、光敏管等,用质子、中子进行位移损伤辐照试验。其他元器件的位移损伤辐照试验参照进行。...2023-10-19 13:24:02浏览:10
查看 -
GB/T 43115-2023 金属材料 薄板和薄带 室温剪切试验方法
本文件规定了金属薄板和薄带室温剪切试验方法的原理、试样、试验设备、试验程序、试验结果处理和试验报告。
本文件适用于厚度0.5 mm~3 mm的金属薄板和薄带室温剪切性能的测定。3 mm以上的板材可参照本文件执行。...2023-10-19 12:48:01浏览:11
查看 -
GB/T 43004-2023 发制品 柔顺性试验方法
本文件描述了用测力法测定发制品柔顺性的试验方法。
本文件适用于长度不小于310 mm的直发发制品。...2023-10-18 05:00:01浏览:10
查看 -
ISO 9022-3-2015 光学和光学仪器--环境试验方法--第3部分:机械应力 Optics and photonics — Environmental test methods — Part 3: Mechanical stress
This part of ISO 9022 specifies the methods relating to the environmental tests of optical instruments
including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices),
under equivalent conditions, for their ability to resist the influence of mechanical stress.
The purpose of the testing is to investigate to what extent the optical, climatic, mechanical, chemical,
and electrical (including electrostatic) performance characteristics of the specimen are affected by
mechanical stress....2023-10-17 05:12:01浏览:18
查看 -
ISO 24117-2020 玻璃制餐具、礼品、珠宝和灯具--玻璃净度--分类和试验方法 Tableware, giftware, jewellery and luminaries, made of glass — Glass clarity — Classification and test method
This document establishes requirements for the use of the glass designations “clear glass” and “ultra-clear glass” for non-coloured glass items according to their clarity and iron content. It specifies a procedure for measuring the clarity of glass items by means of a spectrophotometer.<br />This document is applicable to<br />— mineral glasses, and<br />— glass items where a part is not covered by coating or decoration, and is therefore available for sampling.<br />This document is applicable to the use of glass as tableware, giftware, jewellery and luminaries.<br />It is not applicable to the use of glass in the context of building, watches, containers, medicine and laboratories, and to other technical uses of glass....
2023-10-16 19:48:01浏览:10
查看