A587-96(2001)
|
化学工业用电阻焊低碳钢管
|
Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
|
A588/A588M-04
|
高强度低合金结构钢4英寸(100mm)厚屈服点最小为50ksi(345MPa)
|
Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
|
A589-96(2001)
|
水井用无缝和焊接碳素钢管
|
Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
|
A591/A591M-98
|
薄镀层电解镀锌薄钢板
|
Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications
|
A592/A592M-04
|
压力容器用经回火和淬火的高强度低合金钢锻制附件和零件
|
Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
|
A595-04
|
结构用圆锥形低碳钢管
|
Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use
|
A596/A596M-95(1999)
|
用环形试验法和冲击法测定材料的直流磁性能的试验方法
|
Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
|
A597-87(1999)
|
铸造工具钢
|
Standard Specification for Cast Tool Steel
|
A598/A598M-02
|
磁放大器磁芯的磁性能测试法
|
Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
|
A599/A599M-02
|
锡制品,电解镀锡的冷滚轧薄板规范
|
Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
|
A600-92a(1999)
|
高速工具钢
|
Standard Specification for Tool Steel High Speed
|
A601-96(2000)
|
电解金属锰
|
Standard Specification for Electrolytic Manganese Metal
|
A602-94(2004)
|
汽车用可锻铸铁件
|
Standard Specification for Automotive Malleable Iron Castings
|
A603-98(2003)
|
镀锌结构钢丝绳
|
Standard Specification for Zinc-Coated Steel Structural Wire Rope
|
A604-93(2003)
|
自耗电极再溶化钢棒与钢坯的宏观腐蚀试验方法
|
Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
|
A606-04
|
改进防大气腐蚀性的热轧和冷轧高强度低合金钢薄板和带材
|
Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
|
A608/A608M-02
|
高温受压离心铸造的铁铬镍高合金钢管
|
Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
|
A609/A609M-91(2002)
|
碳素钢,低合金钢和马氏体不锈钢铸件的超声波检测
|
Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
|
A610-79(2000)
|
尺寸测量用铁合金的取样和试验
|
Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
|
A612/A612M-03
|
中温和低温压力容器用高强度碳素钢板
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
|
A615/A615M-04a
|
钢筋混凝土配筋用变形和光面坯钢筋
|
Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
|
A618-04
|
热成型焊接和无缝高强度低合金结构钢管
|
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
|
A623-03
|
锡轧制产品
|
Standard Specification for Tin Mill Products, General Requirements
|
A623M-03
|
镀锡薄钢板轧制品通用要求(米制)
|
Standard Specification for Tin Mill Products, General Requirements [Metric]
|
A624/A624M-03
|
锡辊轧制品.单压延电解马口铁
|
Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
|
A625/A625M-03
|
一次轧制原钢板(未镀)和镀锡薄钢板轧制产品技术规范
|
Standard Specification for Tin Mill Products, Black Plate, Single Reduced
|
A626/A626M-03
|
二次压延电解镀锡厚钢板轧制品技术规范
|
Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
|
A627-03
|
安全设备用均质不易加工的钢棒
|
Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
|
A630-03
|
热浸电解镀锡板镀锡层重量测定的方法
|
Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
|
A632-04
|
通用无缝和焊接奥氏体不锈钢管(小直径)
|
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
|
A633/A633M-01
|
正火的高强度低合金结构钢
|
Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
|
A635/A635M-04e1
|
热轧碳素钢薄板,带材和重型粗盘条规格
|
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
|
A636-76(2000)
|
氧化镍烧结块
|
Standard Specification for Nickel Oxide Sinter
|
A638/A638M-00
|
高温用沉积硬化铁基超级合金棒,锻件及锻坯料
|
Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
|
A640-97(2002)e1
|
8字型缆吊架用镀锌钢丝绳
|
Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
|
A641/A641M-03
|
镀锌(电镀)碳素钢丝技术规范
|
Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
|
A644-98(2003)
|
铁铸件的相关术语
|
Standard Terminology Relating to Iron Castings
|
A645/A645M-99a
|
压力容器用经特殊热处理的5%镍合金钢板
|
Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
|
A646-95(1999)
|
飞机及航空器锻件用优质合金钢大方坯及坯段
|
Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
|
A648-04
|
预应力混凝土管用冷拉钢丝
|
Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
|
A649/A649M-99(2003)
|
波纹纸机械用锻制钢辊规格
|
Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
|
A650/A650M-03
|
二次压延的锡轧黑板材
|
Standard Specification for Tin Mill Products, Black Plate, Double Reduced
|
A653/A653M-04a
|
热浸处理的镀锌铁合金或镀锌合金薄钢板的标准规范
|
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
|
A656/A656M-03
|
具有改良可模锻性的高强度低合金热轧结构钢板
|
Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
|
A657/A657M-03
|
一次和二次压延电解镀铬黑钢板轧制品技术规范
|
Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
|
A659/A659M-97(2001)
|
商业级热轧碳素钢薄板和带材(最大含碳量为0.16%-0.25%)
|
Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
|
A660-96(2001)
|
高温用离心铸造碳素钢管
|
Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
|
A662/A662M-03
|
中温和低温压力容器用锰碳钢板规格
|
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
|
A663/A663M-89(2000)
|
商品级碳素钢棒的机械特性
|
Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
|
A664-99
|
在ASTM规范中对电工钢和层压钢级别的识别
|
Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
|
A666-03
|
退火或冷加工的奥氏体不锈钢薄板、带材、中厚板和扁棒
|
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
|
A667/A667M-87(2003)
|
离心铸造的双金属(灰口及白口铸铁)圆柱体
|
Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
|
A668/A668M-04
|
一般工业用碳素钢和合金钢锻件
|
Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
|
A671-04
|
常温和较低温用电熔焊钢管
|
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
|
A672-96(2001)
|
中温高压用电熔焊钢管
|
Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
|
A673/A673M-04
|
结构钢冲击试验的取样程序
|
Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
|
A674-00
|
水或其它液体用球墨铸铁管的聚乙烯包装
|
Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
|
A675/A675M-03
|
专用热轧碳素钢棒的机械特性
|
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
|
A677/A677M-99
|
全处理型无取向电工钢
|
Standard Specification for Nonoriented Electrical Steel Fully Processed Types
|
A678/A678M-00a
|
结构用经回火和淬火的高强度低合金碳素钢板规格
|
Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
|
A679/A679M-00
|
硬(冷)拉高抗拉强度钢丝
|
Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
|
A681-94(1999)
|
合金工具钢
|
Standard Specification for Tool Steels Alloy
|
A682/A682M-02
|
弹簧用冷轧高碳钢带材
|
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
|
A683/A683M-99
|
半处理型无取向电工钢
|
Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
|
A684/A684M-86(2002)
|
冷轧高碳钢带材
|
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
|
A686-92(1999)
|
碳素工具钢
|
Standard Specification for Tool Steel, Carbon
|
A688/A688M-03
|
焊接的奥氏体不锈钢给水加热器管
|
Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
|
A689-97(2002)
|
弹簧用碳素钢及合金钢棒
|
Standard Specification for Carbon and Alloy Steel Bars for Springs
|
A690/A690M-00a
|
在海洋环境中使用的高强度低合金工字形钢桩和薄板桩规格
|
Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments
|
A691-98(2002)
|
高温下高压装置用电熔焊碳素钢和合金钢管
|
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
|
A693-03
|
沉淀硬化耐热不锈钢板、薄板和带材
|
Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
A694/A694M-03
|
高压传输设备用碳素钢及合金钢管法兰、配件、阀门及零件用锻件
|
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
|
A696-90a(2000)
|
压力管道部件专用热锻或冷精轧碳素钢棒
|
Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
|
A697/A697M-03
|
用伏特计、安培计和瓦特计法测定迭层铁芯样品的交流磁特性的试验方法
|
Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
|
A698/A698M-02
|
在弱交流磁场中磁屏蔽效率的试验方法
|
Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
|
A700-99e1
|
钢制品国内装运的包装、标记和装载方法
|
Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
|
A701-96(2000)
|
硅锰铁
|
Standard Specification for Ferromanganese-Silicon
|
A702-89(2000)
|
热锻钢栅栏柱和组件
|
Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
|
A703/A703M-04a
|
受压部件用钢铸件
|
Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
|
A704/A704M-01
|
混凝土加筋用焊接普通钢棒或杆的光面钢筋或钢筋网
|
Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
|
A705/A705M-95(2000)
|
时效硬化的不锈和耐热钢锻件
|
Standard Specification for Age-Hardening Stainless Steel Forgings
|
A706/A706M-04a
|
混凝土配筋用变形低合金光面无节钢筋
|
Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
|
A707/A707M-02
|
低温设备用锻制碳素钢和合金钢法兰
|
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
|
A709/A709M-04
|
桥梁用结构钢
|
Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
|
A710/A710M-02
|
低碳时效硬化的镍铜铬钼铌合金钢
|
Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
|
A711-04
|
钢锻件坯料
|
Standard Specification for Steel Forging Stock
|
A712-97(2002)
|
软磁性合金电阻率的测试方法
|
Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
|
A713-04
|
热处理部件用高碳弹簧钢丝
|
Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
|
A714-99(2003)
|
高强度低合金焊接钢管和无缝钢管
|
Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
|
A716-03
|
球墨铸铁涵洞管
|
Standard Specification for Ductile Iron Culvert Pipe
|
A717/A717M-01
|
单片样品表面绝缘电阻率的试验方法
|
Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
|
A719/A719M-02
|
磁性材料的叠装系数的试验方法
|
Standard Test Method for Lamination Factor of Magnetic Materials
|
A720/A720M-02
|
无取向电工钢延展性的试验方法
|
Standard Test Method for Ductility of Nonoriented Electrical Steel
|
A721/A721M-02
|
取向的电工钢的延展性试验方法
|
Standard Test Method for Ductility of Oriented Electrical Steel
|
A722/A722M-98(2003)
|
预应力混凝土用无涂覆的高强度钢筋
|
Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete
|
A723/A723M-02
|
高强度压力元件用合金钢锻件
|
Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
|
A724/A724M-04
|
叠层焊接的压力容器用经淬火及回火的碳素钢压力容器板
|
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
|
A726-00
|
半成品型冷轧磁性迭片级钢
|
Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
|
A727/A727M-02
|
具有固定切口韧性的管道部件用碳素钢锻件
|
Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
|
A729-93(1999)
|
货物运输及电气铁路用热处理合金钢轴
|
Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
|
A730-93(1999)
|
铁路用碳素钢及合金钢锻件
|
Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use
|
A732/A732M-02
|
一般设备用熔模铸造碳素低合金钢及高强度加温钴合金钢铸件
|
Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
|
A733-03
|
焊接及无缝碳素钢和奥氏体不锈钢管接头
|
Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
|
A734/A734M-87a(2003)
|
经淬火和回火的合金钢与高强度低合金钢压力容器板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
|
A735/A735M-03
|
中温和低温用低碳锰钼钶合金钢压力容器板
|
Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
|
A736/A736M-03
|
低碳时效硬化的镍铜铬钼铌和镍铜锰钼铌合金钢压力容器板
|
Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
|
A737/A737M-99
|
高强度低合金钢压力容器板
|
Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
|
A738/A738M-03a
|
中温和低温设备用经热处理的碳锰硅钢压力容器板
|
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
|
A739-90a(2000)
|
升温或/和加压部件用热轧合金钢棒
|
Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
|
A740-98(2003)
|
钢丝网(编织或焊接电镀钢丝网)
|
Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
|
A741-98(2003)
|
公路护栏用镀锌钢丝绳和配件
|
Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
|
A742/A742M-03
|
波纹钢管用预涂聚合物和金属涂覆钢薄板
|
Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
|
A743/A743M-03
|
一般用耐腐蚀铬铁及镍铬铁合金铸件
|
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
|
A744/A744M-00e1
|
严酷条件下使用的耐腐蚀镍铬铁合金铸件
|
Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
|
A745/A745M-94(2003)
|
奥氏体钢锻件的超声波检验
|
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
|
A746-03
|
排污管用球墨铸铁
|
Standard Specification for Ductile Iron Gravity Sewer Pipe
|
A747/A747M-99
|
沉淀硬化不锈钢铸件
|
Standard Specification for Steel Castings, Stainless, Precipitation Hardening
|
A748/A748M-87(2003)
|
压力容器用静态铸造的激冷白口铁-灰口铁双金属轧辊
|
Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
|
A749/A749M-97(2002)
|
热轧碳素钢和高强度低合金钢带材通用要求
|
Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
|
A751-01
|
钢制品化学分析的实验方法、操作和术语
|
Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
|
A752-04
|
合金钢条和粗圆钢丝
|
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
|
A752M-04
|
合金钢条和粗圆钢丝(米制)
|
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
|
A753-02
|
镍铁软磁合金
|
Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
|
A754/A754M-96(2000)
|
X射线荧光涂层厚度的试验方法
|
Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by
|