-
Integration of Management Systems: A Process Based Model
The paper discusses the barriers of integration of management systems (IMS). A model based on process is explored. It is indicated that integrating management systems should not ignore the characteristics of the management systems, especially scope issues. IMS needs to take into the continuous improvement....
2020-11-10 09:33:08浏览:68
查看 -
MARKOV SKELETON PROCESS IN PERT NETWORKS
In this article, we investigate Programming Evaluation and Review Technique networks with independently and generally distributed activity durations. For any path in this network, we select all the activities related to this path such that the completion time of the sub-network (only consisting of all the related activities) is equal to the completion time of this path. We use the elapsed time as the supplementary variables and model this sub-network as a Markov skeleton process, the state space is related to the sub-network structure. Then use the backward equation to compute the distribution of the sub-network's completion time, which is an important rule in project management and scheduling....
2020-11-10 09:33:08浏览:40
查看 -
Study on Professional Process of Bra Design
The process of bra design in the underwear industry is studied. Several important aspects of the process were identified: sizing, fabric selection, pattern development and grading, the use of CAD system, fitting and wear trials. Although the design process relies heavily on the expertise and experience of designers, the modern technology such as CAD can facilitate and optimize the design process, and the fitting process on life models is essential for the underwear design. The differences between domestic underwear companies and foreign major ones mainly lie at the lack of dress form specially used for underwear design, lack of CAD/CAM or not making full use of them, and most of all, lack of the professional bra designers or even skillful pattern designers. The prospects and future model of bra design process were also elaborated in this paper....
2020-11-10 09:33:08浏览:70
查看 -
Electrode process of diethyldithiocarbamate on surface of pyrrhotite
The electrode process of diethyldithiocarbamate on the surface of pyrrhotite was studied using systematic electrochemical analysis, including cyclic voltammetry, chronopotentiometry and galvanostatic. Experimental results show that tetraethylthioram disulphide(TETD) is electrodeposited on pyrrhotite electrode surface in the presence of 1.0×10-4 mol/L diethyldithiocarbamate when the electrode potential is higher than 0.25 V. The electrochemical kinetics parameters of the electrode process of diethyldithiocarbamate on surface of pyrrhotite are calculated as follows: the exchange current density is 2.48 μA/cm2, and the transmission coefficient is 0.46. The electrodeposition includes two steps electrochemical reaction. The first reaction is electrochemical adsorption of diethyldithiocarbamate ion, then the adsorbed ion associates with a diethyldithiocarbamate ion from the solution and forms tetraethylthioram disulphide on the surface of pyrrhotite....
2020-11-10 09:33:08浏览:66
查看 -
Concurrent Process Planning for Machined Parts
Detailed manufacturing information about the parts can help designers produce better designs. Detailed manufacturing information is conveyed to the designer through micro-circles within the concurrent design process for machined parts, focusing on instantaneous product design and process planning. The process has three key elements: a hierarchical architecture design of the concurrent process planning system, modeling and reengineering of the concurrent process planning, and modeling of information. The approach is successfully implemented and applied for concurrent design and process planning of some complicated parts....
2020-11-10 09:33:08浏览:37
查看 -
Simulation and Training Package on Corex Process
A software package has been developed for simulation on the Corex process. The simulation and training package on the process of shaft furnace using Corex off gas were introduced. The package consists of three main modules, namely the numerical simulation, the system modeling and optimization, and the training module, which are integrated with graphical interfaces. In addition, the equipment starting and stopping operation and typical trouble-shooting were also included in the package, whereby a practical environment can be established for training of operation and management stuff....
2020-11-10 09:33:08浏览:62
查看 -
Process of Waste Sludge Facultative Metabolism
Laboratory- scale experiments were conducted to determine new technology of waste sludge facultative metabolism . 10-L laboratory-scale facultative reactors were operated during 24-hour sludge residence time (SRT) and in room temperature . Results show that the organic matter in waste sludge after hydrolysis acidification will be reduced by 75.39%, the removal rate of CODer above 85% . Advantage of the process is hydrolysis-acidification in ambient air temperature as there is no need for facilities to be sealed or heated. In addition, the sludge will be recycled into the wastewater treatment system and finally towards zero-discharge....
2020-11-10 09:33:08浏览:36
查看 -
A Multivariate Process Capability Index
Process capability indices have been widely used in the manufacturing industry, providing numerical measures on process precision, process accuracy, and process performance. Capability measures for processes with a single characteristic have been investigated extensively. However, capability measures for processes with multiple characteristics are comparatively neglected. In this paper, inspired by the approach and model of process capability index investigated by K.S.Chen et al.(2003) and A.B.Yeh et al.(1998), a note model of multivariate process capability index based on non-conformity is presented. As for this index, the data of each single characteristic don't require satisfying normal distribution, of which its computing is simple and particioners will not fell too theoretical. At last the application analysis is made....
2020-11-10 09:33:08浏览:40
查看 -
Pay Attention to the Process:A Case Teaching Plan of the Process Approach to Writing
This paper presents the process approach to writing and emphasizes the importance of paying attention to the process through a case teaching plan of the process approach to writing....
2020-11-10 09:33:08浏览:67
查看 -
Effect of Process Parameters on Porosity in Aluminum Lost Foam Process
Porosity is a main defect in aluminum alloy castings, which is also thought to be severe in aluminum alloy castings produced by lost foam process due to the pyrolysis of the polystyrene foam pattern during pouring. Fundamental experiments were carried out to evaluate the effect of process parameters such as the melt treatment, the cooling rate and the density of expanded polystyrene (EPS) foam on porosity in A356.2 bar casting. The effect of melt treatment including degassing and refining was investigated. The effect of cooling rate was also evaluated by changing the mold packing material such as the silica sand, the zircon sand and the steel shots. Gas entrapment due to the turbulent metal flow during mold filling in conventional molding process results in porosity. Mold filling sequence in lost foam process is different from that in conventional molding process. The effect of molten metal flow was estimated by comparing the density of the casting by conventional sodium silicate molding with that by lost foam process. Density measurement was conducted to analyze the extent of porosity in the casting. Source of the porosity in lost foam process can be divided into two factors, i.e. turbulence in molten metal flow and entraining residue or gas from the pattern during pouring....
2020-11-10 09:33:08浏览:62
查看 -
Process of Petri Nets Extension
To describe the dynamic semantics for the network computing, the concept on process is presented based on the semantic model with variable, resource and relation. Accordingly, the formal definition of process and the mapping rules from the specification of Petri nets extension to process are discussed in detail respectively. Based on the collective concepts of process, the specification of dynamic semantics also is constructed as a net system. Finally, to illustrate process intuitively, an example is specified completely....
2020-11-10 09:33:08浏览:40
查看 -
The New Plating Process on Plastics
This process does not use general electroless plating solution containing formaldehyde(carcinogen) and phosphate(the object of waste water regulation). Furthermore, we succeeded in developing a new electroless copper plating solution which is usable semi-permanently by using the special reducing agent. The electroless deposition forms a very thin conductive film on substrate. Therefore, it can prevent some appearance defects (e.g. pits, pin-holes, laminations and inclusions) that occur in the conventional ones. In addition, it is possible to eliminate electroplating of copper from the process by applying the exclusive nickel solution in electroplating. Therefore, the obtained metal parts can be recycled as high quality stainless steel. Given this copper electroplating-free process, 25μ m-thick nickel deposition at the stage of electroplating, at least, enables the metal layers to show properties as versatile as those of the conventional(its total thickness is 25μ m in the comparative conventional process)....
2020-11-10 09:33:08浏览:34
查看 -
Immigration process in catalytic medium
The longtime behavior of the immigration process associated with a catalytic super-Brownian motion is studied. A large number law is proved in dimension d≤3 and a central limit theorem is proved for dimension d=3....
2020-11-10 09:33:08浏览:22
查看 -
石榴籽油提取工艺的研究
以石榴籽为原料,利用超声波辅助有机溶剂提取石榴籽油,在单因素试验的基础上,通过正交试验研究了料液比、提取时间、提取温度、超声波功率对石榴籽油得率的影响,确定了超声波辅助提取石榴籽油的最佳工艺条件.结果表明,石榴籽油的最佳提取工艺条件为:料液比1: 20,提取时间40 min,提取温度50 ℃,超声波功率400 W.在该条件下石榴籽油得率为21.77%....
2020-10-26 22:14:25浏览:74
查看